Catcher processors can use their daily production reports to create and populate landing reports and fish tickets.
NOTE: This consolidated landing report option is not to be used by motherships.
1. After production reports have been created, go to File....New and choose Consolidated as Type of Report.
Click OK.
2. Choose a date range for which you would like to create a consolidated landing report, based on your
production report entries. This could be done weekly, or for a whole trip. Click OK.
3. Enter the crew size of the fishing crew for this date range, which includes the skipper but not observer or the
production crew. You'll notice all of the management programs for the data range you entered are sol.jpg!listed as
separate rows. Highlight one row at a time and click on the Enter CFEC Permit button to enter permit
information for that management program.
4. A Permits dialog box will open with an illustration of a CFEC permit card.
The CFEC permit has three parts:
i. Fishery, for example K91o
ii. Permit: 5-digit number with a check digit (letter); for example, 12345N
iii. Year sequence: 4 numbers plus a check letter, for example 0501x. The first 2 digits of this sequence
are the year that the permit is issued. The next two digits is the card number (ex: the fisherman lost his first
card so it may say 02)
Enter permit information in the fields supplied. The Mag Stripe field is to be used if you have a magnetized
CFEC card and a card swiper. If you do not have a magnetized card and swiper, leave the Mag Stripe field
blank. Click OK.
5. Highlight the next row of a different management program and click on the Enter CFEC Permit button again.
Repeat step #4 again. You'll need to repeat these steps again until you have entered permit information for all
management programs listed for the specified date range.
...