Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 30 Next »

Getting Started

Go to: http://elandingst.alaska.gov/elandings/Login

Enter the following user ID and password:

UserID

Password

DVARDEN

D_varden

Scenario

A longline vessel (ADF&G# 10620) is delivering 18,000 lbs of condition 01 sablefish to The Pisces Plant.
There are two CFEC permit holders making the delivery: one wants to allocate 14,400 lbs of sablefish to his permit, the other wants to allocate 3,600 lbs to her permit.

In this instance, we'll use the percent filed of the permit worksheet to allocate the catch. 
All 18,000 lbs of the sablefish is being sold for human consumption.

The sablefish was harvested in the following stat areas:

365701 & 365630

 



Create a new groundfish landing report after logging in and choosing the operation called
The Pisces Plant, then click on the Groundfish Landing Report button.

  • To begin click on the "Groundfish Landing Report" button.

  • Enter the vessel and permit information 
ADF&G Vessel NumberADF&G Gear CodeCrew SizeNumber of Observers
106206140
Date Fishing BeganDays FishedDate of LandingDiscard Report
03/xx/2020403/xx/2020Not Required, Less than 60 ft.

  • Enter in the CFEC Permit Worksheet and IFQ Permit worksheet information as shown below:
CFEC PermitsManagement ProgramPercentNMFS IDIFQ PermitSpecies
C61B 00108R 2001VIFQ80980007980014710
C61B 00109K 2001AIFQ20980017980034710


  • Enter the stat area information in the Stat Area Worksheet.
Stat AreaPercent
36570175
36563025

 

  • Click on Save to proceed
  • The report will save and you will now see "Groundfish Report Display" at the top of the page, along with a Landing Report number. 
  • Scroll down, and click on the Add/Edit Itemized Catch button to add the catch to your landing. 

  • Enter a line item for each species of fish as shown below. Once all the species have been entered, click Save.

  • Next, click on the Allocate Permits button.

  • Submit your initial report by clicking on the Submit Initial Report button.

  • Generate your IFQ report by clicking on the Generate IFQ Reports button.

  • Submit your IFQ report by clicking on the Submit IFQ Reports button.

  • Submit your final report by clicking on the Submit Final Report button.

You are almost done! You just need to print out the landing receipt (Figure 1.) and your fish tickets (Figure 2.).

Figure 1.

Figure 2.

Observer Fees Detail PDF can also be downloaded. 

Note: All IFQ Landing made in the Training environment will redline due to the PNOL requirements. 


To download and view these instruction in a word document, click on the link below:

eLandings+IFQ+sablefish+landing+report+with+multiple+CFEC+permits.doc



  • No labels